Skoda Fabia S2000 Evo Total Ypres Rally '11 (Job Log)Anzeigen: Diashow Mosaik Liste 1May 14, 2022Panel-line engraved. 2May 14, 2022Classification by paint color. 3May 14, 2022The inner surface of the white shell parts was painted black. 4May 14, 2022L: Gloss White after White Surfacer. R: Gloss Black for Chrom paint. and painted other color. 5May 14, 2022Masking. 6May 14, 2022Chrome paint. 7May 14, 2022The paint applied to the etching peels off easily. So I applied the Vallejo Mecha Primer. 8May 14, 2022Decal. The side decals are made in one piece and take about each 2 hours, and a total of over 6 hours. 9May 14, 2022Tail lamp masking... 10May 14, 2022Clear coat. 11May 14, 2022Surface levelling. 12May 14, 2022Polishied with compound (Tamiya Fine) But, It's a result I'm not happy with. 13May 14, 2022Finally, I did the polishing again the next day. (done) 14May 14, 2022Finally, I did the polishing again the next day. (done) 15May 14, 2022Paint to panel-line and deep mold. 16May 14, 2022Brush painted Flat, Satin black. 17May 14, 2022Brush painted Flat, Satin black. 18May 14, 2022I brushed it with this. Best recommended~ 19May 14, 2022Continuing brush painting. 20May 14, 2022Ext. lamps have been modified for easy attachment and removal using magnets. Youtube Video 21May 14, 2022Ext. lamps have been modified for easy attachment and removal using magnets. Youtube Video 22May 14, 2022Clear coat to front and rear emblem. 23May 14, 2022I cut out the silver foil sticker included in the Bandai Pokemon kit and used it. 24May 14, 2022All done. Ready to assemble. 25May 16, 2022This is similar to VANTA Black. (Acrylic) 26May 16, 2022I started assembling it according to the manual. 27May 16, 2022The wheels were so loose that they had to be fixed with glue. 28May 16, 2022It was the most complex structure of the steer wheels I've ever made. 29May 16, 2022The sheet decal on the floor was attached less closely to give a sense of volume. I plan to detail up only the shoulder side of the seat belt. 30May 16, 2022assembling interior. 31May 16, 2022Inner side of door. 32May 16, 2022Easy detail-up spare tyre. 33May 16, 2022A spare tire must be attached before the roll cage is fully assembled. 34May 16, 2022Then just attach the roof side roll bar. But overall, it is not easy to assemble. 35May 16, 2022Easy detail-up for shoulder harness. 36May 16, 2022After putting on the sheet to the proper length... 37May 16, 2022Wrap it around the roll bar at the back and attach it. 38May 16, 2022I used Hasegawa sheet for sub tail lamp 39May 16, 2022But it was invisible from the outside. It was a waste of time. 40May 16, 2022I attached the front and rear lamp covers and other trivial parts... 41May 16, 2022It was not easy to combine the shell with the lower plate. 42May 16, 2022The wing and the trivial parts on the roof were attached. 43May 16, 2022For the bonnet hook, etching was included in the kit, but the detail was simple, so I used an etching sold separately. 44May 16, 2022Finally, by assembling the extension lamp... 45May 16, 2022Finish 46May 16, 2022Finish 47May 16, 2022Finish Kommentare13 November 2024, 11:14 - Album infoPart-1/2 : motorart.tistory.com/460 Part-2/2 : motorart.tistory.com/463Skoda Fabia S2000 Evo Total96 Bilder1:24FertiggestelltAlle AlbenAlle Alben anzeigen »