Ansaldo/FIAT M40 75/18

Urban Gardini
It's a good paint! I've used it on one of my projects in the past. It brushes lovely right out of the tin. I airbrushed it nice when I got the mix right. Had a cheap Chinese Badger copy airbrush back then with a 0.3mm needle at 15-18 psi with two parts paint and one part tap water plus a couple of drops of acrylic retarder. As for the water I'd recomend you to use distilled water as the water quality differs a lot. The tap water is of good quality here n' drinkable but it's safer to use distilled water. But I put down a primer layer first with Vallejo's nice primer as I don't recomend Lifecolor or any other true acrylic direct on the plastic.

Urban Gardini
In the end it dried rock solid n' I was very happy with it. The colour hues that Lifecolor have is also good. This is the project I used Lifecolor on! MERKAVA Mk.IIIC | Project by McCoy (1:35)

Alberto Bianchi
Thanks for the advice Urban, I will make good use😉 I see the results on the Merkava are more than excellent, the idea of ​​a primer color seems to me good, I read that these colors are a bit delicate and peel off easily

Urban Gardini
Direct on the plastic yes but they do stick to the primer. Don't forget the retarder if you're airbrushin' 'em!