Rossi Peugeot 206

1
February 22, 2023
2
February 22, 2023
3
February 22, 2023
4
February 22, 2023
5
February 22, 2023
6
February 21, 2023
I get all the way to the end and find one damn decal has gone into hiding! Should be a pair of little Gifrones next to the headlights but the blue one......poof! And those eyes on the mirrors.......ugh. i thought they worked as a pair only to find out that wasn't the case.
7
February 20, 2023
Somehow, the red 46s for the sides were off set from their base white and crumbled.....so, not 100% accurate, i'm affraid. But I may well finish this one after all.
8
August 22, 2018
9
August 9, 2018
All of my refs say there are no markings on the bumper. I laid down a piece of tape then applied the decal. once set, off came the tape with the excess Michelin Man.
10
August 9, 2018
11
July 26, 2018
12
July 22, 2018
13
July 15, 2018
14
July 13, 2018
15
July 13, 2018
16
July 15, 2018
17
July 13, 2018
18
July 13, 2018
19
July 13, 2018
20
June 28, 2018

Comentarios

14 28 June 2018, 19:06

Spanjaard
Looking good! I got the kit in my stash, so I will follow closely 🙂

13 July 2018, 08:33

bossy122
Using the Crazy PE set for this. Trying to figure out the shifter part.

13 July 2018, 18:14

bossy122
Looks something like that...

13 July 2018, 19:35

Norbert Steffens
Nice build

14 July 2018, 05:48

bossy122
Getting there, thanks.

14 July 2018, 07:40

Spanjaard
I did not know that PE set. I got it in wish list now 🙂

15 July 2018, 09:14

Spanjaard
Where did you purchase it from?

15 July 2018, 09:29

bossy122
Good ol Ebay. A seller out of China.

15 July 2018, 18:15

bossy122
Ebay.com Item - Crazy Modeler EP0051 1 24 206 WRC 2003 Photo Etched Simplified Version

15 July 2018, 18:22

bossy122
The fun thing to me with that PE set is it gives you the dash vents. ....and a phone....and fan blades you'll never see again.
Also trying out Eduards harnesses. Even with a coat of flat clear, they still look a bit too metallic.

15 July 2018, 18:42

Spanjaard
Thanks a lot bossy122!

15 July 2018, 23:00

bossy122
Added the Eduard harnesses. They could be a brighter shade of blue...

22 July 2018, 19:37

Spanjaard
they look really good 🙂

22 July 2018, 21:29

bossy122
Cleared the big hurtle: the Michelin Man! The Renaissance set comes with 2 decals, a full white decal and the man himself that goes on top of that. Neither of which were cut to fit the headlights or grilles, so dealing with that much decal on an uneven surface was fun....TWICE! But it came out and now I can move forward.

9 August 2018, 18:36

Spanjaard
nice!

9 August 2018, 21:32

bossy122
Thanks. Wasn't so sure I could get that on there. Got that pesky bubble out too. ; )

10 August 2018, 07:09

bossy122
Crawling along with this project.....

22 August 2018, 04:38

bossy122
Wow, last post was 4 plus years ago.....I might finish this one.

20 February 2023, 08:52

Bozzer
We've all been there mate. I've often asked myself, are they ever finished?

20 February 2023, 09:53

bossy122
The ongoing problem with this one is there's a "Gifrone" on the front radiator mesh that I need to make a stencil for, that may never happen, so this one may never be "finished", but I may finish it.

20 February 2023, 10:17

Spanjaard
what is the problem for the stencil? scan the decals, print it in masking paper, cut, it and airbrush it. i can help you with it, if you need help

20 February 2023, 10:41

bossy122
Yeah, the problem I have experienced is with a white decal on a blue surface, the scanner can't pick up the white. The thought then would be to "negative" the scan but because it's blue, it doesn't work. But my idea now is to apply that white decal onto something black, scan it and invert the colors then cut a stencil with the die cutting thingy. Kind of labor intensive.

20 February 2023, 20:52

Spanjaard
ok, that is strange. i scanned some white decals over the usual blue and it was ok. and using GIMP, converted it to vectors in just a couple of steps.

20 February 2023, 22:24

Spanjaard
can you take a picture of that part specific decal? if you can, send me a PM, maybe i can help you

20 February 2023, 22:46

bossy122
Can one PM on this site? My technology is ancient. Using Sihoutte Portrait, it can't/won't outline white as it thinks it's blank, I guess.

20 February 2023, 23:38

Spanjaard
I see you found your way to send PM

21 February 2023, 11:47