Mobile 1 NSX (Job Log 2/2)Voir: Diaporama Mosaïque Liste 1December 2, 2021This is 6 times clear coat and flatting. 2December 2, 2021Shunko decal was heavy thick. 3December 2, 2021Good condition. 4December 2, 2021The transparent paint fell off while painting, so I diluted it with a new one, but the dilution ratio wasn't right, so I quickly erased it with a tissue and repainted. So, a little bit of lint remains, but it disappears during the polishing process. 5December 2, 2021Polishing done. 6December 2, 2021Clea 7December 2, 2021I tried 6 times coating, but in the end, the flattening of the 'mobile 1' part of the wing and door was unsuccessful. 8December 2, 2021I tried 6 times coating, but in the end, the flattening of the 'mobile 1' part of the wing and door was unsuccessful. 9December 2, 2021Final mask work. 10December 2, 2021Done. 11December 2, 2021Panel lining with panel line accent color. 12December 2, 2021Paint brushing with Vallejo. 13December 2, 2021Varnish coat on wind shield decal for UV cut. 14December 2, 2021Paint the gate cutouts with chrome color. 15December 2, 2021Hasegawa sheet. (Stainless) 16December 2, 2021All painting work is done. 17December 2, 2021Assemble Engine. 18December 2, 2021Engine mount to chassis. 19December 2, 2021Assemble exhaust. To level the end of the muffler, a tissue was inserted to secure it. 20December 2, 2021Assemble bathtub. 21December 2, 2021Assemble front drive train. 22December 2, 2021Stick to tire decal. 23December 2, 2021It is too glossy. 24December 2, 2021Paint several times with very diluted 'Vallejo Mecca Varnish(Flat)' 25December 2, 2021Detail-up harness. 26December 2, 2021The decal and paper were cut and pasted on the shoulder cushion. 27December 2, 2021Assemble all inner parts. 28December 2, 2021Other view 29December 2, 2021Other view 30December 2, 2021Other view 31December 2, 2021I attached the parts inside the body shell tightly. 32December 2, 2021I put an Hasegawa sheet(Mirror Surface Finish) on the back. No glue was used where it broken parts. 33December 2, 2021Assemble nose. 34December 2, 2021Tightly attach wind shield. 35December 2, 2021This is metal ball (I can't remember ?mm) 36December 2, 2021Insert the metal ball into the riveted hole. 37December 2, 2021Same work. 38December 2, 2021Metal decal of Hobby Design. 39December 2, 2021Cover the body shell. 40December 2, 2021Attach therear under cowl. 41December 2, 2021Green arrow : Hasegawa sheet(red, flat black) 42December 2, 2021Finish 43December 2, 2021Finish 44December 2, 2021I like this camera angle. Commentaires25 November 2024, 01:48 - Album infoWork done. motorart.tistory.com/365 (Korean)Mobile 1 NSX165 images1:24TerminéTous les albumsVoir tous les albums »