M4 sherman i have decided i want to make into a Normandy moc

1
November 7, 2024
2
November 7, 2024
Making progress...
3
November 7, 2024
Got my two boys in. Tommy and tommi
4
November 8, 2024
Got the tools on
5
November 8, 2024
Painted the turret interior (really nice of tamiya for making an interior for the turret) but it looks horrendous so either im gonna have to paint it with another coat or just leave it like that. Also have to re paint the turret exterior because it looks bad too and i dont have any XF-61 left.
6
November 11, 2024
As one of my inspirations, @clement once said "i buy a kit and then just go on and on buying aftermarket parts". Not the same but a more basic version. Maybe my inspirations should be like astronauts and firefighters but im working with what i have (aka @Gorby, a dude named Kristian, @Kalle Kindel and @Clement).
7
November 11, 2024
Got the 75-er on. Now time for details and accessories
8
November 11, 2024
9
November 11, 2024
This feels wrong.
10
November 12, 2024
Doing this so the hatch could set to the right position
11
November 12, 2024
Got the building and camo of the tank done, used slightly watered down paint at some areas to try and recreate a slight camo pattern. Now im making the accessories and applying the decals
12
November 12, 2024
13
November 12, 2024
Got the decals on, a lot more stars than i thought. Really good decal quality, as i ran my finger over the decals i couldn't feel them. They basically blended into the texture of the Sherman
14
November 12, 2024
One of my favourite quotes is from a WW2 American veteran: "Five of our tanks equaled a German tank. But we always had six." Shows a glimpse into how U.S soldiers thought. Now a valid argument is that all the soldiers didn't think the same as everyone else but as CGP grey once said "You aren't an individual, you are a demographic. And demographics think the same"
15
November 13, 2024
Got the accessories on. This raises my rating of the build from a 7/10 to 9/10. It was an absolute joy to build.
16
November 13, 2024
Hope it dosent look grossly over accessoriesed
17
November 13, 2024
The boxes look out of place.
18
November 13, 2024
Even if there are too many accessories shrubbery will probably cover it anyway. If i decide to add any to my dio
19
November 13, 2024
Got the weathering done. Nothing impressive, just some shading, oil stains and subtle rust effects on the machine guns but i think it looks good. I call the tank FINISHED!!!!!!!
20
November 13, 2024
21
November 13, 2024
I will prove that this barrel on the back of the tank is reasonable and good looking or ill die trying.
22
November 13, 2024
23
November 15, 2024
Very silly scandalous activities
24
November 17, 2024
What
25
November 17, 2024
26
November 17, 2024
27
November 17, 2024
Got the sandbags done, now it might seem too much but let me mind you this M4 has a 75mm which does not have wet ammo stowage so the chance of the ammo lighting on fire when shot is around 80%. And to my knowledge US tankers didn't want to die a horrible death, maybe if they were Japanese but they aren't.
28
November 17, 2024
Lesson learned. NEVER touch CA glue while its drying. Most painful 15 minutes of my life.
29
November 18, 2024
Looks like SCM finally pulled through. Took this pic about a day ago, glued empty shells onto here to make the illusion the commander was throwing them out of the tank to reduce weight or make space. Now the tank is glued to a base but ill send pictures of that when i get out of school.
30
November 18, 2024
4 cans of iced tea, enough M&M to cause the heat death of the universe, about 2 days and a little PVA later we're here. Took a stick from outside and now its drying. Gonna use it to make a tree 😄
31
November 18, 2024
I think i got the dio done? Didnt use the tree though sadly. But i love it as is
32
November 18, 2024
Added some grass to the turret as makeshift camo and to the tracks to make it look like the Sherman has been through hell
33
November 18, 2024
Used a stem of some plant to make the rope which holds the oil barrel
34
November 18, 2024
35
November 18, 2024
Looks alright
36
November 18, 2024
37
November 27, 2024
I don't know what to say here
38
November 29, 2024
Finally consider it finished
39
November 29, 2024
40
November 29, 2024
After a few weeks its finally done
41
November 29, 2024

Hozzászólások

19 7 November, 18:10

gorby
Looking very good so far Kesa.

11 November, 16:37

gorby
Nice work. Don't forget that any loose oil drums or boxes would probably fall off when a real tank moves, so they would most like be strapped down.

13 November, 15:43

Kesa Tiho
I would add straps but i dont have any polystyrene nor the precision to paint them. And on this Sherman in particular it's in place, sniping tigers and any other IFVs so i can imagine it wont be moving much. Though maybe ill try painting straps on the oil drum later.

13 November, 16:03

Spanjaard
you can take the the metal that covers wine bottles (tin?), cut it with scissors, and paint it in any color. or even paint it and then cut in thin stripes. serves really good for this kind of applications. it is possible to buy that kind of material. but if there is any bottle of wine being open at home, you have it for free.... another material that can be used is thin aluminium. Nesquick used to have a thin layer alumium under the lid of their cans for example. pretty useful stuff
a can of cola or similar drinks can be also cut with any scissors, but is is stronger than the other two i mentioned, so it may not be the best for those stripes. but you have some waiting to be used at home for sure. just be careful with your fingers, this stuff can be quite sharp 😉

13 November, 16:15

gorby
If you have any masking tape in works well as straps if you cut narrow strips.

13 November, 16:53

Spanjaard
true, i was going to mention that too, but it seems i forgot at the end.

13 November, 21:25

Kesa Tiho
Thanks for the tips. Ill keep em,' in mind

14 November, 05:35

Kesa Tiho
Since i cant upload pictures for whatever reason *exasperated sigh* ill just update yall through the comments. Started working on the brass shells. Got shell casings onto the Sherman now im painting the APC rounds

17 November, 20:09

Spanjaard
it may one of those days that SCM runs out of disk space and we have to wait until is resolved 😉 I has happened a fre times

17 November, 22:53

Spanjaard
looking good Sherman

17 November, 23:17

Kesa Tiho
Thanks, mate

17 November, 23:33

gorby
Nice progress Kesa. I notice you've discovered that plasters/band-aids are a necessary part of modelling. 😄 😄

18 November, 11:01

Kesa Tiho
You live you learn 😂. Should have discovered it a while ago but I'm a man and men don't bandage cuts (or at least ive been told) but a chemical burn is something i shouldn't tough out.. 😄

18 November, 12:16

gorby
It's very good Kesa.

18 November, 14:58

gorby
great result Kesa!

29 November, 15:52

Spanjaard
nice dio!

29 November, 16:02

Kesa Tiho
Thanks, mates 🙂

29 November, 17:34