Sea King - Rotor
for Airfix
BAM Models | N. BAM48099 | 1:48
I fatti
- Marca:
- BAM Models
- Titolo:
- Sea King - Rotor for Airfix
- Numero:
- BAM48099
- Scala:
- 1:48
- Digita:
- Set di dettagli
- Messo in commercio:
- 2023 Nuovo stampo
- Argomento:
- Sikorsky S-61 » Elicotteri (Aereo)
Progettato per
Mercato
No partner shops available
Recensioni in-box
Revisioni esterne
Non sappiamo se vi siano recensioni per questo (kit) Sea King - Rotor (#BAM48099) da BAM Models.
Commenti
Bernhard Schrock
Today I took a very close look at the MRH I bought a few months ago and compared it with original photos.
At first glance, the product looks good. Unfortunately, I was a bit disappointed because I immediately discovered an error: the „red" blade, which points backwards when folding, has no hydraulics and no mechanics in the original. At BAM it is designed in the same way as the „white" and the „black" blade (left side when folding). After removing the surplus components (correcture), the blade joint looks very far from the original 🙁. Correcting is very difficult because the material is very brittle.🙁
I also miss the „boom" on the top side, to which the main E-cable and three hydraulic lines are attached. Furthermore, I miss on the side opposite the pitch link arm with „white", „black", „blue" and „yellow" blades a important hydraulic component (control cylinder unit) to which four lines (1 x E and 3 x hydraulics) are attached.
Conclusion:
Detailing is better compared to the kit, but unfortunately with some errors.
I will definitely not use it.
Today I took a very close look at the MRH I bought a few months ago and compared it with original photos.
At first glance, the product looks good. Unfortunately, I was a bit disappointed because I immediately discovered an error: the „red" blade, which points backwards when folding, has no hydraulics and no mechanics in the original. At BAM it is designed in the same way as the „white" and the „black" blade (left side when folding). After removing the surplus components (correcture), the blade joint looks very far from the original 🙁. Correcting is very difficult because the material is very brittle.🙁
I also miss the „boom" on the top side, to which the main E-cable and three hydraulic lines are attached. Furthermore, I miss on the side opposite the pitch link arm with „white", „black", „blue" and „yellow" blades a important hydraulic component (control cylinder unit) to which four lines (1 x E and 3 x hydraulics) are attached.
Conclusion:
Detailing is better compared to the kit, but unfortunately with some errors.
I will definitely not use it.
12 January, 08:00
Materiale di riferimento
Sikorsky SH-3D "Sea King" Museo de la Aviación Naval - Instituto Aeronaval
Aeronaval N. 4
Jorge F. Núñez Padín
TBC Tutti i libri » (25 in totale) Tutti i walkaround (immagini dei dettagli) » (35 in totale)