ML-KNIL Curtiss Hawk 75

1
March 21, 2019
Cockpit weathered
2
March 21, 2019
Engine cowling is too oval. This means cutting, sanding, hoping that it will fit together again
3
March 21, 2019
Searching for the right shape
4
March 21, 2019
There you go
5
March 21, 2019
Adding some wiring to the wheel wells and reinforcing the wing with spars
6
March 21, 2019
Structuring the fabric covered ailerons
7
March 21, 2019
Tools I use to make a riveted, stressed skin wing
8
March 21, 2019
In the proces of making relief on the wing
9
March 21, 2019
Wings finished and attached
10
April 14, 2019
Wright Cyclone in place. Now it's an aeroplane!
11
May 30, 2019
Primer revealed some minor issues. Also showed that the stressed skin effect turned out too subtle!
12
June 3, 2019
First attempt ever to mottle an aluminium airframe
13
June 27, 2019
First camo colour: Oudblad, which is FS34102, over aluminium with masking fluid on wing walk ways
14
June 27, 2019
Mottling over green base coat
15
June 27, 2019
Colours I used. Next is several thin coats of FS34102 mixed with a little white
16
October 1, 2019
Still some weathering to do
17
October 1, 2019
Nearing completion
18
January 4, 2020
The completed model. Fancy photo's will be uploaded soon
19
November 1, 2020
20
November 1, 2020
21
November 1, 2020
22
December 21, 2020
23
December 21, 2020
24
December 21, 2020

Commenti

6 21 March 2019, 19:44

gorby
Excellent work so far.

14 April 2019, 14:40

Klaas van der Wielen
Thnx, gorbygould.

14 April 2019, 19:38

Rui S
Looking good ( y)

14 April 2019, 19:51

Klaas van der Wielen
Thnx Rui. You're too kind!

15 April 2019, 12:11

Stephan Ryll
Nice progress 👍

15 April 2019, 18:43

Klaas van der Wielen
Thanks Stephan. It's slowly getting there.

17 April 2019, 19:31

Erik Leijdens
That is looking great so far klaas.

17 April 2019, 19:38

Klaas van der Wielen
Thnx Erik. I already spent a lot of time in it. I hope it's worth it...

17 April 2019, 19:40

Klaas van der Wielen
Thanks. That is one of the reasons to build it. I think the F-16 is beautiful, but I've seen it built too often.

2 October 2019, 15:13

Erik Leijdens
Fantastic job all around Klaas!! My Hawk is on hold for a while now unfortunately but your result give me inspiration again!

1 November 2020, 16:34

Gary Kitchen
Fabulous Build. I've got an old SMER Hawk coming up next in 1:72 and your detail here will certainly be a guide for my efforts.

1 November 2020, 17:18

Klaas van der Wielen
Well thanks guys. I finally had some time to make decent photos. Glad you like them!

2 November 2020, 15:49

Ben M
Very very nice. How did you do the subtle chipping?

22 December 2020, 02:58

Klaas van der Wielen
Thanks Ben. I first gave the plane an aluminium coat and sealed it. Then I applied masking fluid with a piece of sponge on the places which would be worn or exposed to wind flow the most. After camouflaging I simply rubbed the masking of. Because I found the aluminium too bright I toned it down by spraying highly dilluted camouflage green over it.

22 December 2020, 14:22

Ben M
Thank you. I think I will try this on one of my current builds, I like how you were able to control where the chipping happened like in the wing leading edges.

Always nice to see a ml-knil subject like this hawk!

22 December 2020, 21:23

Album info

An attempt to properly build and detail a Special Hobby 1/32 Mohawk mk.IV into a Hawk 75-A7 as used by the Dutch East Indies Air Force during WW2.

ML-KNIL Hawk 75 A7

24 immagini

1:32

Completato

1:32 Mohawk Mk.IV (Special Hobby SH32016)

1:32 P-40B, P-36, H-75 Landing Gear (Scale Aircraft Conversions 32005)

1:32 Curtiss P-40 B/C Tomahawk II (Master AM-32-098)

Tutti gli album

Visualizza tutti gli album »