Wrong tailplanes: This how they look viewed from the top. Actuators must be removed from one part and new ones from plasticard added to the other part.
Undersides painted in RLM76 , AK ref 2009. Good colour match and coverage. But I made a BIG mistake. Instead of using thinner I used Ultra-Matte Varnish ....of
OOB easy and (let's hope) fast project. So far I've just joined the fuselage halves. Parts break-down is very clever. With some care on assembly, a bit filling here and there and checking the parts ...very few filler should be needed ..... Let's see .....
Tail planes and front propeller are wrong and should be corrected. During asembly some glue creeped to the undersides ... so I'll have to fix it .... wet sanding just done ,,,,, Then some Green Stuff and more filing. Front propeller and tailplanes corrected (sort of ...). Primed and some panel lines re-scribed. Ready for painting. Today I've airbrushed the undersides in RLM76 AK ref 2009 ... Good colour match ... but ... I've made a BIG mistake ... I've used mat varnish instead of thinner ... so some ugly splotches have appeared
🙁
I'm affraid I'll have to start it all over again....
Model has been repainted all over. Now the mix was good and sprayed quite well. Nevertheless the paint has not much grip, so I lifted some paint when removing the masking tap
