Honda RA 272 1/24 Hasegawa View: Slideshow Mosaic List 1 March 4, 2018
Engine has been dealed first
2 March 4, 2018
Engine , all painted with acrylics (Gunze & Tamiya)
3 4 May 5, 2018
Paint mixes for engine and exhausts
5 March 4, 2018
Engine and gearbox glued together
6 March 4, 2018
Engine and gearbox assembly
7 March 4, 2018
Bodywork being glued
8 April 2, 2018
Suspension and drive train assembled
9 April 2, 2018
Spark plug wires will be added from cooper wire
10 April 2, 2018
Sh...t happens .. I lost one admission "cone" and the carpet monster has eaten it ... even I have a wood floor and no carpet 😉
11 April 2, 2018
.. so I made a new one from electric wire insulation ... Looks the part ... doesn't it ?
12 April 2, 2018
Engine-gearbox-suspension assembly almost finished
13 April 2, 2018
Fuel lines have been added to the engine
14 April 2, 2018
Rear exhausts stack in place
15 April 2, 2018
And front stack too ...
16 April 2, 2018
I messed-up a bit with with front exhausts ,,, they are quite difficult to glue together ,,,
17 April 2, 2018
All exhaust glued in place .... rather difficult ... Rear stack came quite easy , but I messed-up a bit with the front stack
18 April 2, 2018
Full exhausts stack in place
19 April 2, 2018
Bodywork painted satin white from a rattle can
20 April 2, 2018
And glued to the floor-pan
21 April 5, 2018
Brake lines added from vinyl tube
22 April 10, 2018
Nose being glued to bodywork
23 April 10, 2018
Powertrain and engine cover in place.
24 April 10, 2018
Hinomaru decal broke in some places.
25 April 10, 2018
After some Microsol decal conformed to the surface but broke even more.
26 April 10, 2018
Hinomaru decal painted over with Tamiya gloss red .. looks quite good to me.
27 April 15, 2018
After a coat fo Future looks quite good ...
28 April 15, 2018
Some more progress ... Steering wheel and dashboard
29 May 4, 2018
Powertrain detail
30 May 1, 2018
I'm afraid engine block has been glued a bit to far back and then suspension arms from the kit are too short. I've replaced these parts with wire from a paper clip.
31 May 1, 2018
I messed it up ,,,, when touching up the paint on the arms , some paint went to the body. I tryed to remove with thinner and messed it much more ...
32 33 May 1, 2018
Almost finished ,,,, in the end Hinomaru doesn't look so bad .... isn't it ?
34 May 1, 2018
Not so bad ,,,, but colour hue is just a bit different .... let's see how it turns out after the second coat
35 May 1, 2018
First coat to remove the offending black smudge . Brush painted in X2 Tamiya Gloss White with a touch of Gunze H21 off-white
36 May 4, 2018
Without flash , difference in hue is rather more evident , but it's OK to me.
37 38 39 May 5, 2018
Workbench cleaned ... well ... sort of 😉 ... and now .... let's start another project
Comments 1 4 March 2018, 19:34
Björn Svedberg Really nice engine build! 👍 I'm looking forward to see the rest of the car. 🙂
5 April 2018, 20:50
Album info It should've been an easy project with a bit of added detail and aftermarket decals, but not to be finnished in just a Week-end.
I'm not Mike Grant.
😉
But I'd like to ,,,,,
So let's see how it turns out ,,,,
Pavla seats were discarded ... too big for the cockpit.
Interior : Tamiya XF-53 , XF-22
Seats : Tamiya XF-63 , Gunze H421
Undersides : Gunze H325
Uppersides : Gunze H27 , Gunze (20 H1+12 H27 + 3 H325
All brush painted
In the end the project took much more time than I'd expected. Not an easy shake and bake kit .... at least to me.
39 images
1:24
Completed
All albums View all albums »