Aston Martin DBS
Comentários
25 17 June 2021, 16:37
Patrick Sedneythey are made out of 2mm aluminum tubing, 0.8mm galvanized steel wire, PS and brass sheet. Oh and small pieces of heat shrink tube
29 June 2021, 09:56
DennisReally cool! Looks so much better then the kit parts.
I am using Plastic rods and Bras wire for that purpose but i really want to try to build some from Metal...
29 June 2021, 10:57
Patrick SedneyI find aluminum easier to work for this purpose. You can squeeze it, file it or bend it should you wish and it will keep its shape. Plastic rod needs to be heated and a little heat can be too much for it.
29 June 2021, 15:18
Patrick SedneyOh, by the way, springs are real. I bought some 10mm long and 4mm diameter from Aliexpress. Time ago I tried making them with copper wire, but it's not the same
29 June 2021, 16:22
Patrick Sedney@Dennis, for rollcages maybe you could use brass tubing and solder them with a soldering iron and some solder.
Solder wouldn't stick to Aluminum or steel but will make a perfect bond with brass or copper
29 June 2021, 16:26
DennisThanks for the tip 👍
I was just checking some shops for materials, a proper soldering station and a miter-box 😉
Some brass and aluminum could be the right materials for one of my next projects… 😉
29 June 2021, 17:03
Robert PodkońskiFantastic work on these details and beautiful overall final effect, Patrick. May I ask how did you achieve the ceramic effect on brake discs?
26 November 2021, 06:02
Patrick SedneyThank you!
Robert, the ceramic effect is made exclusively with Vallejo primer (probably ump or stynylrez will work too).
Bottom layer is a mix of Black and white primer. After that, white primer, low pressure and some distance to make bigger drops and scatter them as much as possible.
And, of course, trial and error 😅
26 November 2021, 09:39
Robert PodkońskiThanks for explanations, Patrick. Looks absolutely realistic.
26 November 2021, 09:40
Album info
Aston Martin DBS as in the James Bond's movie "Casino Royale"
