Star Destroyer (Lighting Model)
First Production Limited
Bandai Spirits | No. 5057625 | 1:5000
Fapte
- Marca:
- Bandai Spirits
- Titlu:
- Star Destroyer (Lighting Model) First Production Limited
- Număr:
- 5057625 (Sunt de asemenea listate ca 2466992)
- Scară:
- 1:5000
- Tip:
- Kit complet
- Eliberată:
- 2019 Piese noi
- Cod de bare:
- 4573102576255 (EAN)
- ambalare:
- Casetă rigidă (deschizător de vârf)
- Subiect:
- Star destroyer Imperial-class » Razboiul Stelelor (Operă științifico-fantastică)
Conținutul cutiei
Sprue din plastic (White), Sprue din plastic (Clear), Sprue din plastic (Black), Sprue din plastic (Light gray), Fișă de decupare (autocolante) (Multi-colored)
Dimensiuni:
592x393x75 mm
(23.3x15.5x3 inch)
Greutate:
1192 g (2.63 lbs)
Cronologie produs
Bandai Spirits
Instrucțiuni
Descarca 3279Kb (.pdf)
Piata de desfacere
No partner shops available
In-box recenzii
Recenzii externe
Publicitate
Revizuire Tokyo Model Detective
Revizuire Tokyo Model Detective
Toate recenziile » (5 in total)
Comentarii
Maurin Krüger
Youtube Video
Youtube Video
1 23 May 2019, 01:55
Cody Kwok
It turns out there are two ways to light the kit, the default way where you just have the light ooze out of the holes from the LEDs, and the traditional and more labor intensive one where you use fiber optics (not included). The optimization they've done for you is they included some clear parts where you can stick the FO in. The included booklet by Model Graphix has a SBS guide (english/japanese) of how to do this. The booklet didn't do a good job of differentiating the final outcome (it doesn't want to say the original way is bad of course), but I think FO is by far the better option. But tons more work so back to the stash it did.
It turns out there are two ways to light the kit, the default way where you just have the light ooze out of the holes from the LEDs, and the traditional and more labor intensive one where you use fiber optics (not included). The optimization they've done for you is they included some clear parts where you can stick the FO in. The included booklet by Model Graphix has a SBS guide (english/japanese) of how to do this. The booklet didn't do a good job of differentiating the final outcome (it doesn't want to say the original way is bad of course), but I think FO is by far the better option. But tons more work so back to the stash it did.
7 October 2019, 18:16
Treehugger
Ooh, what is this? 🙂 I would guess a 30-35 cm long model.
Ooh, what is this? 🙂 I would guess a 30-35 cm long model.
All comments (5) » 4 May 2019, 13:55
Demigod
Word on the street is there will be the lighted premium version and a cheaper version without the lighting kit.
Word on the street is there will be the lighted premium version and a cheaper version without the lighting kit.
5 May 2019, 09:56
Jdalianis
@ Demigod: Yes the lighted version is about 50% more than the unlighted one. The lighted one is supposed to include a special booklet and have clear parts (duh!).
If Bandai had done this a year and a half ago I would have grabbed one. As it is I spent a lot of time super detailing and lighting the Revell kit (which is slightly bigger than Banadai's) and then I bought the Zvezda with all the Resin and PE aftermarket items along with a lighting kit. The Zvezda is almost twice the size of Bandai. I love Bandai and have all their smaller Star Wars kits but this came too late for me. I will pass.
@ Demigod: Yes the lighted version is about 50% more than the unlighted one. The lighted one is supposed to include a special booklet and have clear parts (duh!).
If Bandai had done this a year and a half ago I would have grabbed one. As it is I spent a lot of time super detailing and lighting the Revell kit (which is slightly bigger than Banadai's) and then I bought the Zvezda with all the Resin and PE aftermarket items along with a lighting kit. The Zvezda is almost twice the size of Bandai. I love Bandai and have all their smaller Star Wars kits but this came too late for me. I will pass.
7 May 2019, 05:21