Mobile 1 NSX (Job Log 1/2)

Remove and punch revet. 

Remove and punch revet. 

Grind thinly. 

Fill the pin hole. 

Masking 

Mask on XF-16 

Make temporary handle and attach it 

Paint black surfacer to inside. To prevent light from passing through... 

Done 

Done 

The wings were painted only on the underside 

Done 

Remove for detail up. 

Make temporary handle. 

Stick it. 

Joint line is filled with UV putty. 

but, filled panel line. 

Scraping. 

Mask 

Paint white surfacer(gloss) 

 

Decal trouble occurred. 

I got shunko decal.
but It was damaged. 

but, I cleaned it well and used it. 

Late. but I'm done. 

It was hard work. 

Done. 

1st clear coat. 

Pre-assemble for easy painting. 

Gunmetal and flat aluminium. 

Mask again. 

Done. 

Detail-up with brass pipe. 

Dropped and broken. 

I fixed it temporarily and continued painting. 

Inner mirror is metal sticker. (It is a sticker that comes inside the tamiya case. 

It is Hasegawa sheet. 

1. paint
2. Mask with stockings. and airbrushing gun metal.
3. Paint the edges with Tamiya XF-1 marker. 

Shunko decal is too thick. 

Rough sanding. 

Rough sanding. 

Rough sanding. 

Modified. 

2nd clear coated. and sanding. 

It was erased so I drew it.