Academy 1:48 Lockheed P-38L Pathfinder
Коментари
13 5 April 2023, 00:02
Afonso Braga
Started this kit because the box is damaged, i had this project for years now so it is time to clear shelves and create room for more as well as actually build and not just collect 🤣🤣
Started this kit because the box is damaged, i had this project for years now so it is time to clear shelves and create room for more as well as actually build and not just collect 🤣🤣
5 April 2023, 00:05
Afonso Braga
Getting there!! Main body almost assembled, upper fuselage prepared.
Next step, drill holes for drop tank and prepare them for paint job
Getting there!! Main body almost assembled, upper fuselage prepared.
Next step, drill holes for drop tank and prepare them for paint job
8 April 2023, 09:55
Afonso Braga
Next step: paint the silver part of fuselage, add nose with the weight to balance correctly and finally paint the olive drab coat
Next step: paint the silver part of fuselage, add nose with the weight to balance correctly and finally paint the olive drab coat
9 April 2023, 11:02
Afonso Braga
The fit is nice but the cockpit details are dreadful, I recommend the legend cockpit which will provide extreme detail, it will be compatible to all P-38's from academy
The fit is nice but the cockpit details are dreadful, I recommend the legend cockpit which will provide extreme detail, it will be compatible to all P-38's from academy
9 April 2023, 16:45
Afonso Braga
I have one of those but i am saving for the P-38 "Putt Putt Maru" also from academy. I will add a picture so you may identify what it is
I have one of those but i am saving for the P-38 "Putt Putt Maru" also from academy. I will add a picture so you may identify what it is
9 April 2023, 16:48
Afonso Braga
Top fuselage primed with AK extreme metal black base followed by several coats of AK Extreme Metal Polished Aluminium
Top fuselage primed with AK extreme metal black base followed by several coats of AK Extreme Metal Polished Aluminium
10 April 2023, 19:37
Afonso Braga
The instructions mislead me, be careful with the olive drab coat, the nose is to remain polished aluminium
The instructions mislead me, be careful with the olive drab coat, the nose is to remain polished aluminium
11 April 2023, 14:51
Afonso Braga
Decals applied some minor retouches missing and a few parts waiting to be glued
Decals applied some minor retouches missing and a few parts waiting to be glued
12 April 2023, 23:12
Afonso Braga
I am in deep trouble, yesterday i was so tired but trying to do a little bit more when i should have stopped, I accidentally spilled thinner over the wings so now i will have to try to correct it and hope that the damage won't be permanent.
A good advice, if you are tired it is better to stop and get a grip or some rest 😭😭😭
I am in deep trouble, yesterday i was so tired but trying to do a little bit more when i should have stopped, I accidentally spilled thinner over the wings so now i will have to try to correct it and hope that the damage won't be permanent.
A good advice, if you are tired it is better to stop and get a grip or some rest 😭😭😭
13 April 2023, 09:40
Afonso Braga
I think so as well, but i'll have to prime it again and then apply the xtreme metal over the affected zone, i need to be extra careful to not damage the decals or the canopy
I think so as well, but i'll have to prime it again and then apply the xtreme metal over the affected zone, i need to be extra careful to not damage the decals or the canopy
13 April 2023, 11:44
Afonso Braga
Couldn't do better than what is now, luckily this model is not for direct display but for a resin experience
Couldn't do better than what is now, luckily this model is not for direct display but for a resin experience
13 April 2023, 14:02
Afonso Braga
Could be a lot worse but at least it is not wrecked
12 parts missing and 2 decals
Could be a lot worse but at least it is not wrecked
12 parts missing and 2 decals
13 April 2023, 22:50
Afonso Braga
I didn't have burnt metal so i had to be creative and used on the turbochargers and exhausts 4 coats:
1 - a layer of titanium gold
2 - brushed titanium silver over titanium gold
3 - sprayed some smoke on top
4 - used black tamiya panel liner over all the surface
Please give me feedback if it looks similar or not 😃
I didn't have burnt metal so i had to be creative and used on the turbochargers and exhausts 4 coats:
1 - a layer of titanium gold
2 - brushed titanium silver over titanium gold
3 - sprayed some smoke on top
4 - used black tamiya panel liner over all the surface
Please give me feedback if it looks similar or not 😃
13 April 2023, 23:52
Afonso Braga
Ready!! Please leave any feedback wether good or any suggestions/ critics , all are welcome and use them to improve myself
Thank you all
Ready!! Please leave any feedback wether good or any suggestions/ critics , all are welcome and use them to improve myself
Thank you all
14 April 2023, 13:37