John Deere 310 Backhoe LoaderПоглед: Слидесхов Мозаик Листа 1April 27, 2023Added panel lines and foot control, planning on adding the hydraulic fluid cap on the floor. 2April 27, 2023The white scrap is to add hydraulic lines to keep them in place once the cab is on the chassis. 3April 27, 2023 4April 27, 2023Making the backhoe movable. Had to do some surgery to cut all the parts free. 5April 27, 2023 6April 27, 2023Added missing hydraulic pushers on the side to side movement of the backhoe 7April 27, 2023 8April 27, 2023 9April 27, 2023 10April 27, 2023 11April 27, 2023Extension of the backhoe 12April 27, 2023Added some extra bits, bobs and wiring to add more detail to the engine. Only after gluing it together did I find a PE fan blades, oh well. 13April 27, 2023 14April 27, 2023 15April 27, 2023Cut the stabilizers free so that they move. 16April 27, 2023 17April 27, 2023 18April 27, 2023Adding the hydraulic tubes to the stabilizers, The original ones were molded right to the stabilizers and were totally wrong. It is weird that ERTL included the hole in the frame where the hydraulic tube connected to the frame. 19April 27, 2023 20April 27, 2023 21April 27, 2023 22April 27, 2023 23April 27, 2023 24April 27, 2023 25April 27, 2023Adding hydraulic lines to the controls. Used lead wire for the plumbing. 26April 27, 2023Dry fitting together 27April 27, 2023 28April 27, 2023 Коментари13 November 2024, 21:17 - Album infoUpdating the 1970's ERTL kit. 310 Backhoe Loader28 слике1:25ЗавршеноСви албумиПрикажи све албуме »