Mercedes Unimog - DAKAR '86

1
October 18, 2024
Chassis now complete, with the wheels on first time
2
October 18, 2024
and the other side
3
October 18, 2024
taped together the cargo tent, then "capillary-action" glued with SMS Extra thin cement - aiming for a seamless finish...
However, there's no ZIP of flap moulded anywhere..................................nah, not me, not this time!!
4
October 18, 2024
cabin almost complete - painted with POSCA pens
5
October 18, 2024
working on the "Roo" bar (not that they saw many roos on the Dakar)
6
October 18, 2024
Then preparing the real mesh grills - very tricky - so tricky in fact that I had a complete fail on the 7mm x 5mm items for the underslung driving lights......they seem to have found themselves to the box of shame......they lost them on the first stage thru the dunes.
7
October 18, 2024
Components getting ready
8
October 18, 2024
built up the external roll cage - just coated the plastic with "FUTURE"
9
October 18, 2024
more random components, mud flaps, grill, undertrayu storage
10
October 18, 2024
there's the rear cargo tent - seamless - ready to get painted
11
October 18, 2024
had to do a major chassis repair - one of the forestays broke off - now back together with a 1mm brass rod dowel.
12
October 18, 2024
the roo bar without the underslung lights
13
October 23, 2024
Finally got brave and started some spray painting - everything got a coat of Tamiya White Primer.
Then Gloss White on the cabin, Canvas and roof
14
October 23, 2024
Then I sprayed some royal blue to simulate night sky on the wagon - my first attempt on spray fading
15
October 23, 2024
And final White coats on the cabin roof...
Time to put some more of this Unimog together!!!!
16
October 25, 2024
Now to paint up the roof lights - I guess they're lights - POSCA pen for the blue, Tamiya X7 for the red.
masking tape with 2 holes punched thru it as a mask.
17
October 25, 2024
Front of the cabin where I've carefgully picked out the "UNIMOG L1300" letters
18
October 25, 2024
Mounting of the Mercedes logo on the mesh grill - no set mounting for this, so had to count the vertical mesh strands....
19
October 25, 2024
Masking removed - lights look good, but need a "bottom"
20
October 25, 2024
more masking to allow a black bottom to the lights
21
October 25, 2024
Used one of these "long-necked" paint pens to get the necessary access - these are great for so many uses - marking holes thru something thicker than a pencil will go thru - etc etc etc....
22
October 25, 2024
Daggy molding on the wipers needed some attention....
23
October 25, 2024
kit called for stretched sprue to make the aerial, with no clue as to how to incorporate that.
Decided to use 0.5mm steel rod - so had to drill the 0.5mm hole thru the aerial base - BY HAND!!
Who needs a precision drill press?!?!?!?!?!? - I'M IMPRESSED!!!!
24
November 1, 2024
LHS Decals completed on the tarp
25
November 1, 2024
Aided by my trusty modelling mate, Siri (cos she's into everything, with her sister Alexa!)
26
November 1, 2024
Lots more details to do
27
November 1, 2024
Skinny decals applied to the external roll cage
28
November 1, 2024
First day of decalling done - LHS, Front, Bull Bar, Roll cage & Top
29
November 1, 2024
Next day - RHS complete
30
November 1, 2024
and the back too
31
November 1, 2024
The unassembled front components
32
November 1, 2024
LHS again - now to Matt Clear the lot, after masking windows etc...
33
November 3, 2024
Finals steps - fitting the external Roll Cage - I was not happy with the fitment engineering, which would have meant gluing to the paintwork/decals, so I added an extra "bolt" to each of the brackets, and used a 0.5mm pin as a secure fixing point, (circled) then secured all with CA.
34
November 3, 2024
Then coloured in the bolts heads to make it look good!!! (Circled)
The engineer in me is now happy!
Bull bar & side mirrors to go....
35
November 4, 2024
The final bit of clamping to ensure that the external roll-cage is firmly attached.
36
November 4, 2024
COMPLETED: Driver's seat & dash
37
November 4, 2024
COMPLETED: Front LHS quarter
38
November 4, 2024
COMPLETED: Passenger's seat
39
November 4, 2024
COMPLETED: Front RHS quarter
40
November 4, 2024
COMPLETED: RHS
41
November 4, 2024
COMPLETED: Frontal
42
November 4, 2024
COMPLETED: Rear

DONE!!

Коментарі

15 18 October, 07:32

Qwertzel
The Unimog is such a cool vehicle. Good job!

18 October, 09:16

Goldman
Great progress Roger. Very interesting model. Come on Revell, start re-releasing these kits again!

18 October, 10:48

Goldman
The model looks great with the decals on. Nice!

1 November, 12:15

Dominik Weitzer
well done!

4 November, 12:52

nikfrost
Really nice job!

17 November, 16:34

Roger Trewenack (Scales-Sales)
Thanks everyone - Came up OK for q quick-build in-betweener!!

18 November, 01:27

Album info

Restarting this build, originally from Craig, who I knew during my time at Coles Myer Ltd - another lifetime ago!!
Most of the painting done......yay!
Can't help playing with the finer details - silly, I know!!
01Nov - this should be ready for the Nov ESSMC meeting!!
04Nov - completed!

Mercedes Unimog U 1300L - DAKAR '86

42 зображення

1:24

Завершені

1:24 Mercedes Unimog U 1300L (Revell 7450)

Усі альбоми

Переглянути всі альбоми »