Trumpeter 1/35 KV-1 Mod1939Переглянути: Слайд-шоу Мозаїка СписокКоментарі3 July 2024, 20:24 - Project infoTrumpeter KV-1109 зображення1:35ЗавершеніУсі альбомиПереглянути всі альбоми »
![](/albums/img/0/0/3/969003-56165-92-p.jpg "You can just see that I've now opened up the hole on the hull sides for the tow cable retainer. This step was conveniently left off the instructions! Luckily, I've got the KV-2 also, so I opened the holes on that kit and used a couple of carefully fitted pieces of masking tape to transfer a "brass rubbing" from one kit to the other. Then it was just a matter of some careful drilling. | View full picture")
![](/albums/img/7/5/8/984758-56165-82-p.jpg "The drive sprocket has had some dark steel pigment added to the teeth. I used a 2B pencil on the inside face of the tracks along the line of the sprocket holes. I had tried the pigment there too, but it proved very difficult to get a decent effect. The next step is to get the tracks & wheels fitted. There is a mud scraper to fit just forward of the drive sprocket too. That will need weathering adding too. As you can also see, the towing loop retainer is now fitted. The "brass rubbing" method of hole placement worked a treat! | View full picture")
rc modeling database | менеджер запасівrc modeling database | менеджер запасів
