BTR-80A Hungarian ISAF

1
June 11, 2022
Initial assembly of the hull has been completed. Some filling and sanding was required but nothing grounbreaking. I added various handles using copper wire
2
June 11, 2022
Some further assembly has been done. I finished many of the hull details and started with the rather complex turret. I think making those copper-wire-handles might pay out in the form of some nice looking details later...
3
June 14, 2022
Some further progress: I built an extra stowage bin I had seen on some reference pictures. Now, I am only missing the suspension parts and some final turret details
4
June 15, 2022
Assembly is done. Now onto painting
5
June 15, 2022
6
June 15, 2022
Building this was - apart from some suspension-fiddling - a rather pleasant experience
7
June 17, 2022
Some basepaint has been applied with different green shades
8
June 17, 2022
On the top I tried to bring in some distressed paint by irregulary spraying the highlight-colour on bigger panels
9
June 18, 2022
Decals are on and some details have been basecoated.
10
June 18, 2022
I also added some smaller highlights using a brush. Now, It will get a nice coat of varnish to proceed to some airbrush pre-dusting
11
June 20, 2022
Sprayed some light earth Tamiya paints over chipping varnish as a sort of pre-dusting
12
June 20, 2022
The lower hull was also heavily pre-weathered using the same method. This darker dust layers will serve as a foundation to be enhanced with some lighter dust weathering simulating more recent dust and debris
13
June 20, 2022
Then, I wore it down using a soft brush moistenend in tap water to replicate some packed patches of older dirt worn into the surface
14
June 21, 2022
Some oil paints have been applied to change colour on some elements and to enhance the pre-dusting
15
June 21, 2022
Now, the next steps will be a pin-wash and some chipping. As I have a good foundation for the weathering effect I am after, I can then use some final enamel effects and/or pigments to tie everything together
16
June 23, 2022
I added a brown wash to darken some shadows and panel-lines. I had to red-apply some oils after that to bring back some lighter colours...
17
June 23, 2022
Also, I added a light dust enamel-paint to reproduce more intense and recent dust-accumulations.
18
June 23, 2022
Chipping has also been done using dark brown acrylic paint. I tried to be smewhat restrained here, which apparently was a good decision 🙂
Now, it´s onto some final effects like painting periscopes, adding some rust and exhaust-stains etc.
19
June 24, 2022
Had an issue with some wheel-alignment, which means I have to pose the vehicle on some terrain... Here you see some tinkering with a piece of styrofoam
20
June 24, 2022
Used my new hot-wire cutter to make a chunk of foam with some more or less straight edges as a base
21
June 24, 2022
The vehicle itself is practically finished. I have yet to do some work on the diorama terrain and decide wether to put a ditch in front of the vehicle and a small hill or a wall/ fence behind it
22
June 26, 2022
Basic construction of the base: it is made from a foam base covered with air drying clay to match the vehicle´s wheels. Texture will be refined with acrylic pastes.
23
June 29, 2022
Textures have been applied to the base
24
June 29, 2022
I wanted to experiment and coated the sides with some concrete-texture instead of framing them with balsa... I´m curious how it will look in the end or if I´ll have to sand it down
25
July 5, 2022
Some painting on the base: Tamiya paints for the basic earth tones and AK acrylics for details as such as individual stones etc.
I also smoothed out the texture on the sides as I was not entirely happy with it. It then got painted using some black craft-store paint
26
July 6, 2022
The build is finished and I have a little base to go with it 👍
27
July 6, 2022
28
July 6, 2022
29
July 6, 2022
30
July 6, 2022
31
July 6, 2022
32
July 6, 2022
33
July 6, 2022
34
July 6, 2022
35
July 6, 2022
36
July 6, 2022
37
July 6, 2022

Коментарі

45 11 June 2022, 11:43

Simon Nagorsnik
I have already tried this kit, however, the assembly went completely wrong.
A year later I ordered it again and hope that the next attempt went better🙂
So: follow your progress!

11 June 2022, 13:34

Tom B.
The alignment of those multi-part hulls and turrets is indeed a challenge and I can easily see it going wrong to be honest. While I had only minor problems with this particular kit, I do remeber having issues with the hull of the Centauro I built some time ago. After all I think those kits are worth putting in that little extra-effort!

11 June 2022, 20:05

Michael Muschalik
Hope to see the BTR-82, but Alexey said he won't do "ruSSian" armor anymore...
Maybe as Ukrainian vehicle...

13 June 2022, 16:47

Tom B.
Can´t blame him for that decision at all... However, converting this kit to a BTR-82 seems to be plausible and I had once given it some thought. The hardest part of said rework would in my mind be resculpting the turret front. Engine deck-changes should be achievable by cutting out/sanding down the old details and scratchbuilding the new ones. As hinte however, this will be task for someone more confident in their scratchbuilding-ability than I have in mine at the moment 🙂

13 June 2022, 17:55

Zsolt Czegle
Great subject! Following!

14 June 2022, 06:17

Finn
Will follow

14 June 2022, 12:36

Maicon Werplotz
Nice built so far....

15 June 2022, 20:50

Simon Nagorsnik
Congratulations on the finished construction progress 👍

15 June 2022, 21:36

Simon Nagorsnik
Nice results so far👍
Like your dust base layer, nice effect
Still watching your progress...

21 June 2022, 20:08

Michael Kohl
looking good so far.

23 June 2022, 12:22

Rui S
I agree 👍

25 June 2022, 14:37

gorby
Nice work so far.

25 June 2022, 14:42

Simon Nagorsnik
It´s taking shape! Nice thing to watch your progress!
Good idea to cover the sides of the base with texture past, i think that's a good way.

30 June 2022, 11:52

Łukasz Gliński
Very interesting 👍

30 June 2022, 13:43

Simon Nagorsnik
Spectacular finish👍👍
Vehicle, base and paint job fits very well together!
What do you use for the tail lights, or they are painted? And wich color have you used for the green?

6 July 2022, 17:20

Tom B.
For the green I went with a mix from Tamiya Dark Green and NATO Green. The mix was then lightened up with Deck Tan for highlights. The taillights are basecoated with an acrylic silver paint and then I applied Tamiya Clear Red onto it 👍

6 July 2022, 19:43

Simon Nagorsnik
Thanks for your answer Tom! The tail lights turns out very well on your pics 👍

6 July 2022, 19:53

Finn
Well done!

7 July 2022, 06:08

Tom B.
Thanks Finn 👍

7 July 2022, 16:21

Album info

Building the ACE 1/72 BTR-80A as a Hungarian ISAF vehicle.

BTR-80A Hungarian ISAF

37 зображення

1:72

Завершені

1:72 Russian 2A72 30mm Barrel (T-Model TK72002)

Усі альбоми

Переглянути всі альбоми »