Soviet 2A3 Kondensator 2P 406 mm Self-propelled Howitzer
Trumpeter | No. 09529 | 1:35
faktat
- Brändi:
- Trumpeter
- otsikko:
- Soviet 2A3 Kondensator 2P 406 mm Self-propelled Howitzer
- Määrä:
- 09529
- asteikko:
- 1:35
- Tyyppi:
- Täysi pakkaus
- julkaisi:
- 2018 Uusi työkalu
- Viivakoodi:
- 9580208095295 (EAN)
- Pakkaus:
- Jäykkä laatikko (ylempi avaaja)
- Aihe:
- 2A3 Kondensator 2P » Itsekulkeva tykistö (ajoneuvot)
Laatikon sisältö
Muoviset ruuvit, Valokuvanäköinen raivostuminen, Tarra-arkki (vesiliukumäki)
Mitat:
450x290x90 mm
(17.7x11.4x3.5 inch)
Paino:
1046 g (2.31 lbs)
Boxart suunnittelija Vincent Wai
Tuotteen aikajana
Trumpeter
Ohjeet
ladata 2297Kb (.pdf)
markkinat
No partner shops available
In-box-arviot
Ulkoiset arvostelut
Mainos
Arvostelu Nigel’s Mustang and Models
Kaikki arvostelut » (5 yhteensä)
Kommentit
Treehugger
Btw, I counted the track links. 12 sets of 18, for a total of 216, or 108 on both sides. Build guide states the kit requires 101 track links on each side, so there is apparently 7 spare track links on each side. 🙂
The tracks are not moving and have to be glued in place. No ejection pin marks what so ever. There are four stubs for each track link that has to be cleaned up.
Btw, I counted the track links. 12 sets of 18, for a total of 216, or 108 on both sides. Build guide states the kit requires 101 track links on each side, so there is apparently 7 spare track links on each side. 🙂
The tracks are not moving and have to be glued in place. No ejection pin marks what so ever. There are four stubs for each track link that has to be cleaned up.
6 September 2021, 09:51
Aleksandr Kharkov
This model must by 570 mm long. Have anyone enough free space for it? Heh
This model must by 570 mm long. Have anyone enough free space for it? Heh
12 March 2018, 11:06
THE BEAST
You're wrong. This is length of 2B1 "Oka" (made same time as Kondesator) copied on most sites. Just compare photos.
You're wrong. This is length of 2B1 "Oka" (made same time as Kondesator) copied on most sites. Just compare photos.
28 August 2018, 15:40
Rex
hmm, 20+ inches long for that model would seem just about right, Aleksandr. You and I both see about 8 or more inches for the vehicle, plus about a foot for the barrel.
hmm, 20+ inches long for that model would seem just about right, Aleksandr. You and I both see about 8 or more inches for the vehicle, plus about a foot for the barrel.
28 August 2018, 16:08
THE BEAST
No. Diameter of road wheel is 550mm. So you can easily calculate length from photos: about 13-14 meters. So model will be about 400 mm length.
No. Diameter of road wheel is 550mm. So you can easily calculate length from photos: about 13-14 meters. So model will be about 400 mm length.
29 August 2018, 15:05
Rex
"43 cm" is on the box, according to the review posted on Scalemates. So, yeah, wayyyy smaller than Aleksandr's joke,,,,,,,geez. (but, 3 cm longer than the "correcting Beast" )
"43 cm" is on the box, according to the review posted on Scalemates. So, yeah, wayyyy smaller than Aleksandr's joke,,,,,,,geez. (but, 3 cm longer than the "correcting Beast" )
29 August 2018, 15:26
projektit
3 kuvien
Trumpeter's Soviet 2A3 Kondensator 2P 406 mm Self-propelled Howitzer1:35
Re. the cannon barrel, I airbrushed on black matte primer and sanded it off again to get an idea if there were areas wit...